Computers that run HomeButler
HomeButler installs on most small computers. Here is what it needs, and the models we have looked at.
What your computer needs
- 4processor cores
- 16 GBmemory
- 256 GBSSD
- 1 GbpsEthernet
- 3free USB ports
- An x86-64 computer that starts from a USB stick in UEFI mode (nearly everything made since 2015).
- An SSD, not a spinning disk. HomeButler erases the disk it installs on, after asking you.
- Wired Ethernet for the first start. Wi-Fi works afterwards.
- Two free USB ports for the Zigbee and Thread sticks, and one for the install stick. A powered hub is fine.
- A graphics card (NVIDIA, 8 GB or more) is optional and unlocks the faster local assistant and room view.
Models
| Model | Status | Package | Notes |
|---|---|---|---|
| BOSGAME E7 (Core 3 100U, 16 GB) | Tested | Entry / DIY | The model the installer is built and bench-tested on. 4 USB-A ports, 2 Ethernet. Checked 2026-10-23. |
| Minisforum AI X1 Pro-470 | Recommended, install pending | Standard | Sold in the Standard package. Specifications match the minimums; a full install on this model is still to do. Checked 2026-10-23. |
| Minisforum MS-A2 | Recommended, install pending | Standard | Five USB-A ports, so no hub is needed. A full install on this model is still to do. Checked 2026-10-23. |
| Minisforum AtomMan G1 Pro (RTX 5060) | Recommended, install pending | Pro | Has the graphics card for the local assistant. Driver install is part of the Pro image; a full install on this model is still to do. Checked 2026-10-23. |
| Minisforum MS-S1 MAX | Recommended, install pending | Family Hub | Compute and storage in one box. A full install on this model is still to do. Checked 2026-10-23. |
Using a different computer? The installer checks these minimums when it starts and tells you in plain words if something falls short.